How to drain water from a stretch ceiling: simple tips for self-solving problems

The most common ceiling design option is a stretch canvas. This ceiling surface has the following advantages: quick installation, a variety of shapes and designs, strength, durability. No one is safe from such an unpleasant situation as flooding a room. If this happens, the owners have a question:how to drain water from a stretch ceiling yourself? After all, it is not always possible to use the services of a specialist.

What steps should be taken immediately after flooding?

Often, flooding occurs at the most inopportune moment. It is not always possible to turn to professionals for help, as an emergency can occur at night or on holidays. If the canvas does not retain moisture at all, and the water flows quickly, there is only one conclusion: poor-quality installation was carried out.

Turn off the power so that the wiring is not shorted.
Transport household appliances and other expensive items to another room.
Prepare the dishes in which you will drain the liquid.

After the above preparatory work has been completed, you can begin to drain the water.

Draining water through the lamp mounting ring

Not all designs have a drain valve. If it is absent, you can drain the liquid through the mounting ring of the lighting device. Before starting work, you must definitely turn off the apartment, otherwise you can get a strong electric shock.

To drain water from a stretch ceiling, the following tools are useful:

Bucket or basin.
Steady table or stepladder.
Hose.

First, remove the light fixture. Then a hose is installed in the mounting ring, and its second edge is placed in the container. Then you need to carefully lift the bubble with moisture and direct it to the mounting ring. It is very inconvenient to carry out such work independently, so it is better to find an assistant. The procedure itself is not at all complicated, two people will cope with such a task very easily.

How to drain water yourself from a stretch ceiling through a mounting ring - video

Drain fluid over the edge of the tension web

On some canvases there is no mounting ring for the lamp. Then the water drains over the edge closest to the liquid bubble. The procedure is best carried out with a partner.

First you need to carefully release the necessary area from the frame. The canvas needs to be maintained so that water does not overflow. Do not press on the bubble, otherwise the liquid will “disperse” over the entire ceiling surface. In the future, this will lead to mold. All manipulations must be carried out very carefully so as not to deform the canvas. A hose is also used for draining. It is inserted into the hole, and then the water is drained into the container over the edge of the structure.

Possible errors when draining water from a stretch ceiling

If you are not sure that you can drain the water yourself, it is better to contact professionals. Although the task is not difficult, it is impossible to make mistakes. If the drain is not performed correctly, the stretch ceiling will have to be completely replaced, since it will not be subject to restoration.

Typical mistake - You unreliably determined the amount of water in the ceiling. The draining procedure must not be interrupted, so more empty containers should be prepared.
Second mistake - incorrect assessment of their own capabilities. Many believe that they can cope on their own, but it is extremely difficult to do. A partner will be required at least in order to timely change the full containers, substituting empty dishes to the drain hole.
The most serious mistake - cut the bubble with water. Under the heavy weight of the liquid, a small cut instantly transforms into a large hole. After that, you will have to replace the canvas with a new one. If, nevertheless, you are more fortunate, and the cut did not lead to a gap on the surface, still such a sheet will not be able to retain moisture if flooding occurs again.

Stretch ceiling drain - a task that can be done without the help of a specialist. It is advisable to carry out the procedure together, as the process will certainly be successful and quick.

Where does the water come from

In the photo, the ceiling in the bathroom, where the probability of leakage is especially high

There is only one reason for the appearance of water between the draft ceiling and the suspended structure - this is the flooding of the upper neighbors. If there are no neighbors from above, and you live on the top floor, most likely the cause of the problem was a leak in the roofing system.

If the neighbors from above are to blame for the flooding, water appears in rooms such as a bathroom or kitchen, since there is something to leak from. However, living quarters are also not protected from flooding if a heating pipe breaks through a floor above. If the cause of flooding in the defect of the roofing system, the leak can be in any room.

What to do

What to do if you are flooded and water appears between the draft and stretch ceilings?

Flooding, in which water flows in streams, is extremely rare. Even if a pipe burst from above so that a “belly” forms on the vinyl ceiling, water should flow for at least a day, or even more. This means that there is a real opportunity to identify the problem at an early stage when drops are heard from above.

It is difficult not to hear how water drips over the stretched membrane of the ceiling. Therefore, if the sound of droplets is heard, do not hesitate to go up to the neighbor and find out what’s the matter, maybe the leak can be stopped.

It happens that flooding occurs during the absence of neighbors. In this case, you need to call the housekeeping workers or contact the emergency services.

How can water be on the ceiling

In addition to sloppy neighbors, there can be several reasons for this phenomenon:

Penetration of cold water due to breakthrough of the main pipeline.
Hot water from water supply and heating systems.
Liquids from the sewer.
Rainfalls entering the room from storm drains or through the attic.

Also, moisture without objective reasons may appear as a result of “dry” leaks in hot weather, when condensation accumulates under the coating.

Important! If cold water gets on the ceiling, this will cause minimal damage to the coating. If hot fluid accumulates, you will most likely have to completely replace the canvas. The same applies to sewage. In this case, the stretch ceiling is not only substantially deformed, but will also lose in its aesthetic qualities.

How do suspended ceilings behave during flooding

Only ceilings made of PVC film can save a room from a great flood. They stretch almost twice, due to the density of the material, and form a kind of "bubble" that reliably holds water.

Penetrating through the ceiling beams, water begins to flow down the walls and goes inside the ceiling. With reliable and high-quality fastening of the stretch ceiling, fluid will collect on the surface of the canvas, pulling it. In this case, 1 square. m. PVC film can hold 100-120 liters.

Fabric stretch ceilings have a porous structure. Moisture, falling on them, quickly seeps through micropores, and floods the room. In addition, under the weight of water, the coating may not withstand, and the canvas will turn out of baguettes.

Despite the fact that fabric ceilings are seamless, they are able to retain moisture for a very short time and in small volumes.

Therefore, experts recommend not using fabric textures in rooms with high humidity or in rooms where there is a possibility of flooding (kitchen, bathroom).

Training

In case of unexpected flooding, you can call a special company that provides services to eliminate such disasters. If this is not possible, you will have to act on your own.

Before draining water from suspended ceilings, you must prepare:

Remove all household appliances from the room, furniture and other valuables.
Cover the remaining interior items with a thick film.
Prepare pots, buckets and other containers for draining water.
Find a place to drain. This can be a hole located in the place of installation of the lamp or an angle in the maximum proximity to the greatest accumulation of water.

Stretch ceilings water discharge, possible errors

Not such a critical situation if the ceiling is flooded in the bathroom or in the kitchen. In this case, just stretch the hose and pump water into the sink. The situation is different with the coating in the rooms.

When a leak occurs, the ceiling sags, so it is almost impossible to determine the amount of fluid accumulated there. The denser the material, the more water it can hold. In any case, there will be many. Therefore, without the help of strangers can not do.

The most common mistake with self-discharge is the incorrect determination of the amount of water. Other errors include:

Puncture of material to drain water.

Important! It is forbidden to pierce the canvas. Even a small hole will increase in diameter under the weight of water and you will have to say goodbye to a stretch ceiling.

Run fluid through the canvas to the hole for the lighting device.
Attempts to smooth the canvas with improvised items.
Drying the ceiling with a household hairdryer in order to restore its original structure. This can only be done with a gun for installing suspended ceilings or with a building hairdryer.

Through an opening located at the installation site of the lighting device

It is necessary to act as follows:

Find the lamp located closest to the maximum accumulation of water on the canvas, and dismantle it, after disconnecting the electricity.
Pull the canvas by the “hole” from the chandelier down until the moment when water begins to flow out of it into the substituted bucket.

Important! A reinforcing ring is put on the opening for the lighting device to prevent the web from spreading. When draining water and pulling the film, it is necessary to stick your fingers inside the ring and grab it in your hands in several places.

Pull the canvas until water is completely pumped out of it. With too large volumes of fluid, the help of a second person is needed, who will lift the bubble from the middle.

You can use the hose by inserting it into the hole if there is a lot of water on the ceiling. This will make it easier to avoid overfilling the bucket with water. It is enough to clamp the outlet end of the hose with your fingers at the moment when the other person will take out the water containers from the room.

When the water stops draining into the bucket, the work is over. However, there is no need to rush to mount the lighting element back and turn on the power supply circuit breakers. This can only be done after the panel and the entire ceiling surface have completely dried. Typically, the waiting period is from 2 days to a week.

Through dismantling the skirting board indoors

This method will help if the lighting devices are located far from the place of the greatest accumulation of water. It is necessary:

Determine the wall section of the structure closest to the maximum sagging of the canvas.
Remove the desired part of the ceiling skirting.
Carefully detach a small portion of the film. The canvas should be kept as tight as possible.

To dismantle the web from the fastening, it is necessary to arm yourself with a tool like a screwdriver, the edges of which should be wrapped with a soft cloth so as not to pierce the material. Having inserted the tool into the profile groove, it is necessary to bend the bar until the fastening becomes noticeable. Then use a pair of pliers to pick up the harpoon and remove it from the profile. For such an “operation” it is enough to dismantle 20 cm of the coating. Now you can start pumping water.

If the volume of water is not too large, it can be drained into a substituted bucket by slowly lowering the edge of the film. For a large amount of liquid, you should use a hose, as in the first method.

It is necessary to act very carefully if the ceiling is flooded with boiling water. Hands should be protected by thermal gloves. And it is better if such work is done by specialists. They should also be called for help when the bubble hangs over the sharp edge of the table or other furniture, threatening to rupture at any time.

Ceiling drying after draining water

After the water is completely drained from the ceiling, it must be well dried. Otherwise, the emergence and development of mold spores cannot be avoided. It is better if the drying of the panel will be carried out by a specialist using the equipment intended for these purposes. Usually the canvas is heated with a heat gun or a building hair dryer.

Most often, companies that install stretch ceilings give a guarantee for coverage. Therefore, you can contact them. They will not only eliminate the effects of the flood, but will also make a discount on repairs, returning the canvas to its original form.

On a note! Only fabric coatings can restore their former shape and smooth themselves. If the ceiling from the PVC film is flooded, after the rescue work and re-installation are over, the canvas will remain wrinkled, only the specialist will return the original appearance to the ceiling using a heat gun.

If the flooding was strong, it is necessary to dry the base ceiling, as well as treat it with antiseptic solutions and remove the cracked plaster.

In conclusion, it can be noted that the flooding of suspended ceilings is not such a terrible disaster. Observing certain rules and technologies, it will be possible to eliminate all the consequences of the flood.

How to drain water from a stretch ceiling on your own

The stretch ceiling is a film made of polyvinyl chloride (PVC), which perfectly retains moisture. The material is thin, but elastic, so it does not tear under load, but stretches, forming a convex tank hanging above the head. The baguette holding the structure on the walls or floors is reliable enough to prevent the canvas from breaking. All elements are specifically designed to prevent flooding from occurring under any circumstances. Not a drop should fall on the floor. It remains to solve the main problem - if the neighbors from above have an accident, how to return everything to its former place in their apartment? After all, draining water from a stretch ceiling is a difficult task. We tell in the article.

What to do first

Having found, instead of the usual smooth surface, a formidably overhanging giant bubble, it is urgent to take action. Firstly, it is not a fact that the installation work was carried out efficiently. You can never exclude the possibility that the coating breaks with all the consequences in the literal and figurative sense. Secondly, pendant structures often hide electrical wiring and lighting fixtures. You can’t flood them in any way - this threatens, at best, with a short circuit.

Of course, the first thing to do is to call specialists from the company that performed the installation, but on holidays such companies usually do not work. The problem often has to be solved independently. To avoid additional difficulties, you should adhere to the following rules.

Sequencing

If you began to flood, do not immediately drain the contents of the tank. First of all, it is necessary to disconnect all wiring located on top. If this is not done, there is a chance to get an electric shock when you touch a damp cloth.
It is important to contact the neighbors from above. Perhaps they are unaware that they might flood. One way or another, they must identify and eliminate the cause of the leak.
Furniture and valuables must be removed from the premises - there are no guarantees that it will be possible to safely drain water from the stretch ceiling. That which cannot be removed must be covered with plastic wrap. Perhaps there is a reason to try to protect the expensive flooring with the same method by making film overlays on the walls.

When the problem no longer threatens heavy losses, it's time to start looking for draining containers.

Common mistakes

Often in such a situation, the idea arises of supporting the PVC film with a stick in order to distribute the mass around the entire perimeter. The logic is simple - if the main volume accumulates in the center, the gap will occur with a high degree of probability. The main thing here is not to overdo it and not to push too hard. The item should not be too pointed so as not to tear the coating.

Sometimes residents decide to make a hole to drain. Do not do this in any case. Even with minor damage, the film immediately tears, and then the water will have to be pumped out not from the ceiling, but from the floor. It should be released without gaps and punctures. Even a stretched cloth can still be used for its intended purpose, if it is properly dried and mounted strictly according to technology, but it will not be possible to sew it up.

Problems arise when it is not possible to correctly calculate how much fluid has to be drained. As a result, you have to remove it from the floor - there are not enough basins and cans, it’s too late to run after them, and the flow can no longer be stopped.

When there is a special valve

The canvas has a special valve in case of leaks. The algorithm is extremely simple. The hole opens, a container is placed below it, then another, and so on, until the incident is completely exhausted. The fluid can be adjusted to the valve by pressing on the film with your hands or a mop, but you need to act carefully so as not to tear it. It is able to withstand a large mass, but not cuts and punctures. It is good if there is a hose of a suitable diameter and a stepladder at hand. The coating at the end of the work will have to be removed. This is necessary so that it can again be pulled without wrinkles and sagging. In addition, he needs to dry to prevent mold and mildew.

How much water can the ceiling withstand?

Hypothetically, the stretch ceiling can withstand a load of up to 100 kg / m 2. This means that the canvas in a room of 10 m2 can withstand a ton of water. But do not be tied to this figure.

p, blockquote 5,0,0,0,0 ->

p, blockquote 6.0,0,0,0,0 ->

How much water the stretch ceiling can withstand will depend on a number of additional factors:

p, blockquote 7,0,0,0,0 ->

p, blockquote 8,0,0,0,0 ->

quality PVC film,
mounting level. Have all installation rules been followed, have the installers saved on the number of self-tapping screws, stiffeners, etc.,
the presence of seams on the film (a welded ceiling may not withstand a large amount of water and burst at the junction),
ceiling area - the larger it is, the smaller the load per square meter the film can withstand (no one canceled the laws of physics),
forms. Round - can withstand more weight than a rectangular, and narrow and long - will protect better than a square,
tension level. According to the instructions, the film area should be 5-7% smaller than the size of the room (so that it does not sag, but is tightly stretched). But some manufacturers, in an attempt to save money, make the canvas 9-10% smaller. Such savings make themselves felt just in times of critical situations. Excessive stretching in conjunction with the weight of the water leads to the fact that the film bursts or flies out of the mounts.

When determining how many liters a concrete ceiling can hold, it is better to proceed from the worst case scenario (both the installers and the manufacturer saved, and the film turned out to be a fake) - in this case, the ceiling will withstand a load of 60-70 kg / m 2.

If all the circumstances are the most favorable way (quality, size, shape), then the allowable load can be safely doubled.

p, blockquote 10,0,0,0,0 ->

p, blockquote 11,0,0,0,0 ->

For fabric ceilings, the performance is much worse:

p, blockquote 12,0,0,0,0 ->

The fabrics used for stretching are leaking. They are treated with special compounds that increase water resistance, but they do not give 100% protection,
unlike film, fabric ceilings are not elastic. The weight of a large volume of water will simply rip the fabric from the fixtures.

It is worth noting that fabric ceilings are ordered less often than film ceilings and are installed in most cases in bedrooms and living rooms. While floods occur more often in kitchens and bathrooms.

p, blockquote 13,0,0,0,0 ->

What materials better tolerate the flood?

Of course, PVC film will tolerate flooding better than fabric. If it is possible to drain the water without damaging the canvas of the stretch ceiling, then after drying and reinstallation, there will be no trace of the flood. PVC film will take its original form without losing color, shape and presentation.

p, blockquote 15,0,0,0,0 ->

The fabric can not withstand such a test. It will definitely have to be changed. If there was a lot of water, the canvas will rip out of the profile; the fabric cannot be reinstalled. A small flood will also completely ruin the fabric. After drying, a stain will remain on it, and the tissue itself may sag at the place of flooding.

p, blockquote 16,0,0,0,0 ->

p, blockquote 17,0,0,0,0 - ->

How to understand that there is water?

Everything is simple with the fabric - it will darken very quickly, and will begin to drip from it. With a large amount of water, the canvas partially sags, and then breaks out of the mounts.

p, blockquote 18,0,0,0,0 ->

Nothing will flow from the PVC film. The only option for leaks is in the places where the cornices and lighting fixtures are fixed, but this is rare. Due to the rigid attachment of the mounting rings to the floor slabs, the openings usually remain above the main web filled with water.

p, blockquote 19,0,0,0,0 ->

With a large volume of water, it will all gather in one place, and the film will sag with a bubble. The lower edge of the bubble may be 50–70 cm below the main level of the ceiling. Do not be afraid of this - after removing moisture and drying, the canvas will return to its original form.

p, blockquote 20,0,1,0,0 ->

p, blockquote 21,0,0,0,0 ->

Three ways to flush

The only true way: call the installers of the manufacturer and entrust this work to them. Moreover, after self-removal of moisture, they will still have to be called up. Even if they managed to remove everything to the last drop on their own.

p, blockquote 22,0,0,0,0 ->

PVC film is tight - therefore, floor slabs will remain wet. From moisture, mold will appear, which can go down the walls and go beyond the stretch ceiling.

To avoid such a scenario, the canvas after flooding must be partially or completely dismantled. Dry everything thoroughly and re-install.

p, blockquote 24,0,0,0,0 ->

p, blockquote 25,0,0,0,0 ->

Therefore, the remaining two methods can only be called a temporary solution to the problem.

p, blockquote 26,0,0,0,0 ->

Preliminary preparation

Before you start fixing the problem, you need to take care of your own safety. At the first sign of flooding, the room should be completely de-energized, in order to avoid a short circuit or electric shock.

p, blockquote 27,0,0,0,0 ->

p, blockquote 28,0,0,0,0 ->

Then you should do the safety of household items. To take out everything that is possible from the room (first of all, electrical appliances). The remaining items, furniture and flooring should be covered with polyethylene.

p, blockquote 29,0,0,0,0 ->

After completing the initial tasks, it’s worth establish and eliminate the cause of flooding. There are three options:

p, blockquote 30,0,0,0,0 ->

The neighbors poured from above.
Water pipes broke through between floors.
Heating system failure in a floor slab.

In the third case, you should not deal with the independent elimination of the problem. Chemicals added to the heating system can have a negative impact on health in the process of eliminating leaks.

p, blockquote 31,0,0,0,0 ->

In the first two cases, you can cope on your own, having previously eliminated the cause of the flood (by contacting the housing office and blocking the riser).

p, blockquote 32,0,0,0,0 ->

You need to prepare for the flood elimination process so as not to do worse than it was (tear the film or flood the entire room). Panic and rush is not worth it. Water under the ceiling can be several hours without consequences, and in some cases several days.

p, blockquote 33,0,0,0,0 ->

The most convenient way to fix the problem is the three of us:

p, blockquote 34,0,0,0,0 ->

the first - regulates and directs the stream,
the second - continuously holds containers for water,
the third - pours the contents of the buckets into the sewer.

In extreme cases, you can cope together, but in this case you will have to stock up on a large number of containers - After all, hundreds of liters of liquid can be in the stretch ceiling.

p, blockquote 35,0,0,0,0 ->

p, blockquote 36,0,0,0,0 ->

It will not be possible to liquidate the flood alone without proper preparation (either water will be on the floor or the canvas will be damaged). If assistants could not be found, it is better not to waste strength and nerves, but wait for specialists.

p, blockquote 37,0,0,0,0 ->

If it was possible to form a liquidation team, then in addition to buckets, it is advisable to acquire a stepladder and a hose - so the process will go much faster and more productively.

p, blockquote 38,0,0,0,0 ->

Water removal through technical openings (openings for fixtures and cornices)

After the preparatory phase, you can begin to drain. To expel water from a stretch ceiling is quite simple. The main thing is not to rush so as not to damage the canvas.

p, blockquote 39,0,0,0,0 ->

p, blockquote 40,0,0,0,0 ->

p, blockquote 41,1,0,0,0 ->

Carefully remove the lighting fixture closest to the leakage point (having previously made sure that it is de-energized).
If there is a rubber hose:
- insert it into the hole so that one end of the hose reaches an empty container, and the other is immersed in water in the place of sagging,
- create a vacuum in the hose (pump it out using a pump, or draw in some air from the hose, like from a cocktail tube) so that water starts to flow down it into the container,
- if the water masses are far from the end of the hose, they can be fitted to the hole. If growth allows - with your hands, otherwise - with a soft mop. This should be done in smooth wide movements without strong pressure on the canvas.

If there is no hose:
- substitute a container under the drain hole. Spare buckets should be kept nearby so that you can quickly replace the filled one with an empty one,
- gently pull down the edges of the hole so that it is slightly below the main plane of the ceiling,
- Using a wide, soft mop, gradually adjust the water to the pumping point.
After the bubble disappears at the site of flooding, we can assume that we managed to lower the bulk of the water, and the ceiling and repairs were saved.

After this, you can safely expect a repair team to dismantle, dry and reinstall the tension web.

p, blockquote 42,0,0,0,0 ->

Over the edge of the structure

If it is not possible to remove the chandelier, or lamps and cornices are installed on the walls or in a drywall, rather than a canvas, then the process of self-removal of water proceeds according to another scenario.

p, blockquote 43,0,0,0,0 ->

p, blockquote 44,0,0,0,0 ->

Progress

p, blockquote 45,0,0,0,0 ->

Initially, you need to find out what method the canvas was fixed. This information can be indicated in the supply contract, or it can be clarified with your seller. If the contract does not contain this information, as well as communication with the manufacturer, you can try to visually determine the installation method.

p, blockquote 46,0,0,0,0 ->

There are three main methods for attaching PVC film (for fabric, the installation method is not important, the fabric cannot be reinstalled, so the ceiling will have to be changed anyway):

p, blockquote 47,0,0,0,0 ->

Harpoon. The most common way to install PVC ceilings. 90% of all products are installed by this method. To dismantle the edge of the ceiling, it is enough to remove the masking tape (for this, just pull it by hand) and press the harpoon vertically upward, it will unfasten and exit the groove. You need to press very carefully so as not to damage the canvas. A pointed spatula with rounded edges is suitable for this purpose. If there is no suitable tool at hand, you can use a plastic card, or something similar in shape and properties.
Wedge. With this installation method, dismantling the edge will be a little more difficult. You will have to pull out the camouflage insert, then carefully slide the wedge to release part of the canvas.
Clip-on. Dismantling the canvas with this installation is quite simple. It is enough to gently press the edge of the film where it is in contact with the upper half of the clip. The clip loosens and the film can be pulled out of the latch. The main thing is to do everything smoothly and accurately, without sharp jerking movements.

Once the correct dismantling method is installed, water can be removed. To do this, you will have to free 50–100 cm of canvas from the profile. If the dismantled part of the film is smaller, then it is likely that water from the suspended ceiling will flow onto the wall, ruining the wallpaper. Then after the bay you will have to re-carry out repairs. If you free the gap longer than a meter, the combined weight of the film and water can tear out a much larger piece of canvas from the profile than planned. That is, the entire ceiling will spontaneously be dismantled.

p, blockquote 48,0,0,0,0 ->

Then you can proceed in the same way as when working with a technological hole. To pump out moisture by inserting a hose inside, or carefully release water through the unfastened edge. The option with a hose is preferable, so there is less chance to fill the wallpaper.

p, blockquote 49,0,0,0,0 ->

p, blockquote 50,0,0,0,0 ->

Repair and elimination of the consequences of the bay

To avoid such a development of events, the film must be removed, at least partially, and it is good to dry everything after flooding. There are two ways to do this:

p, blockquote 62,0,0,1,0 ->

Temporarily leave the ceiling dismantled for natural drying. This method is less financially expensive (you can dismantle the film yourself, having paid only for re-installation), but inconvenient in terms of implementation. Depending on the time of year and the degree of the bay, drying can take from a couple of days to a couple of weeks. All this time, using the room will be very problematic. An unstable to mechanical damage web will be spread in it. If the family has small children or pets - most likely, the PVC film will not survive such a drying.
Pay for a full range of services: dismantling, drying and re-installation. Money for these events can be demanded from the flood-stricken neighbors. This approach will reduce time costs up to 1-2 days. In this case, the responsibility for the performance of the work and the integrity of the canvas will rest with the company conducting the work.

If there are doubts about the quality of drying, it is advisable to treat antifungal compounds before reinstalling the stretch ceiling of the floor slab. This will prevent the possible formation of mold.

p, blockquote 63,0,0,0,0 ->

p, blockquote 64,0,0,0,0 ->

When re-installed under the influence of heat guns, the canvas will straighten out and take its original form. But part of the canvas may be dirty (fingerprints, mop marks, etc.).

p, blockquote 65,0,0,0,0 ->

Cleaning after the bay is no different from regular cleaning of the ceiling. Using soft non-abrasive products, all visible contaminants are easily removed from the film. Typically, manufacturers of household chemicals indicate on the label whether this product can be applied to stretch ceilings.

p, blockquote 66,0,0,0,0 ->

Can flooding be prevented?

The only way to prevent the flood is to eliminate all possible causes:

p, blockquote 67,0,0,0,0 ->

change the risers of heating and water supply,
arrange with a neighbor on top to waterproof the floor.

But there are a number of nuances:

p, blockquote 68,0,0,0,0 ->

new pipes may be defective, or the specialists involved in their installation may not be qualified enough,
a neighbor may refuse to waterproof the floor. After all, this process will give him a lot of inconvenience:
- high-quality waterproofing is a very costly phenomenon, but why does the neighbor need extra expenses,
- it can be carried out only during the overhaul, completely replacing the flooring, doors, etc.,
- if the flood is arranged by someone living even higher, then all the water will remain in the neighbor’s apartment from above, and will not flow down, which is also not very good for him.

Therefore, it will be difficult enough to persuade a neighbor to carry out such work.

p, blockquote 69,0,0,0,0 ->

p, blockquote 70,0,0,0,0 ->

Theoretically, it is possible to waterproof the ceiling, but almost no one does this for two reasons:

p, blockquote 71,0,0,0,0 ->

The height of the ceilings is reduced, and taking into account the additional loss of centimeters when installing the stretch fabric, the total amount can be quite substantial.
The financial costs of high-quality waterproofing are higher than the costs of replacing a PVC ceiling, which makes this process unprofitable.

In connection with the nuances listed above, it is almost impossible to achieve one hundred percent protection from the flood, and if possible, it is impractical in material terms.

p, blockquote 72,0,0,0,0 ->

p, blockquote 73,0,0,0,0 ->

How much does it cost to call specialists?

The cost of repair work depends on a number of factors:

p, blockquote 74,0,0,0,0 ->

pricing policy in the region (in large megacities and small cities, the amount may vary significantly),
area and complexity of the ceiling,
mounting method
a set of necessary services (installation, dismantling, drying).

The master will be able to give the exact amount only after visiting the object, but you need to be guided by 30-50% of the original contract amount.

p, blockquote 75,0,0,0,0 ->

Do not be afraid of such large numbers, because in the absence of a stretch ceiling, the cost of repairing and replacing furniture and equipment would be much more.

p, blockquote 76,0,0,0,0 ->